TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 881 of 1348

ASSEMBLY - Continued

1

2

3

4

5

6

7

Figure 14.

Drawbar Assembly.

WARNING

Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep away from open flame and use in well-ventilated

area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately

with soap and water. Failure to comply may result in injury or death to personnel.

12.

Apply adhesive sealant on end of tube assembly (Figure 14, Item 4).

13.

Apply sealing compound to threads of six screws (Figure 14, Item 1).

14.

With the aid of an assistant, steady drawbar structure (Figure 14, Item 6) while installing plate (Figure 14, Item

3) on tube assembly (Figure 14, Item 4) with six screws (Figure 14, Item 1) and lockwashers (Figure 14, Item

2).

15.

Remove pin assembly (Figure 14, Item 5) and place tube assembly (Figure 14, Item 4) in retracted position.

16.

Install pin assembly (Figure 15, Item 1) and locking latch (Figure 14, Item 7) into locked position.

TM 9-2330-342-23&P

0103

0103-11