TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012
TM-9-2330-342-23-P

  TM-9-2330-342-23-P - Page 98 of 1348

TEST EQUIPMENT SETUP FOR PRESSURE TEST 49, 50 AND 51 - Continued
Maintenance Support Device (MSD) Serial ICE Kit Setup
NOTE
TK pressure transducer installation may require adapter.
1. Install appropriate TK pressure transducer:
Table
4.
Transducers.
Test
Transducer
Scale
49
Red stripe
0-25 psi
50
Blue stripe
0-1000 psi
51
Yellow stripe
0-9999 psi
2. Connect W4 cable to installed transducer.
TK PRESSURE
TRANSDUCER
W4 CABLE
W4 CABLE
J2/J3
CONNECTORS
ICE BOX
J6
CONNECTOR
P1
CONNECTOR
CABLE P1
CONNECTOR
J6 CONNECTOR
Figure 7.
ICE Box Setup for Pressure Test.
3. Connect other end of W4 cable to J2/J3 connector on ICE BOX.
4. Connect cable P1 connector to J6 connector on ICE BOX.
TM 9-2330-342-23&P
0004
0004-6


Back to Top