TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 99 of 1348
TEST EQUIPMENT SETUP FOR PRESSURE TEST 49, 50 AND 51 - Continued
CABLE P3
SERIAL PORT
COM2
MSD POWER
PORT
CABLE P2
Figure 8.
MSD Serial and Power Cable Connection.
5. Connect cable P3 connector to serial port (COM2) connector on rear of MSD.
6. Connect cable P2 connector to MSD power port.
7. Connect DC output cable from power converter to J5 connector on ICE BOX.
8. Connect 110 vac supply cable or NATO slave cable to power converter.
J5 CONNECTOR
ICE BOX
NATO/SLAVE
CONNECTOR
DC OUTPUT
CABLE
W1 CABLE
J1 CONNECTOR
POWER
SWITCH
CONNECT TO
DCA
CONNECTOR
W1 CABLE
AC INPUT
DC INPUT
FUSE
POWER
CONVERTER
110 VAC
SUPPLY CABLE
NATO
CONNECTOR
NATO/SLAVE
CONNECTOR
Figure 9.
MSD/ICE Power Setup.
9. Connect W1 cable to J1 connector on ICE BOX and to vehicle DCA connector.
10. Push ICE Box circuit breaker button to ON position.
11. Return to troubleshooting procedure.
END OF TASK
TM 9-2330-342-23&P
0004
0004-7
Back to Top
