TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 107 of 1348

TEST EQUIPMENT SETUP FOR CONTINUITY AND RESISTANCE TESTS 91 AND 92 - Continued.

J4

CONNECTOR

RED

LEAD

BLACK

LEAD

W2

CABLE

Figure 21.

CTS Setup for Continuity and Resistance Test.

2. If performing offset procedure, short red (+) and black (-) leads together.

3. Connect red (+) and black (-) leads to the appropriate test points.

END OF TASK

Soldiers Portable On-system Repair Tool (SPORT) Setup

1. Connect button probe cable to J4 connector on ICE BOX.

W2 CABLE

J5 CONNECTOR

J4 CONNECTOR

P3

CONNECTOR

P2

CONNECTOR

ICE BOX

RED

LEAD

BLACK

LEAD

Figure 22.

SPORT Setup for Continuity and Resistance Test.

2. Connect cable P1 connector to J6 connector on ICE BOX.

CAUTION

If removing PCMCIA card, ensure PCMCIA drive is properly shutdown through Eject

Hardware icon on lower right side of desktop screen toolbar or by shutting down

Soldiers Portable On-system Repair Tool (SPORT). Failure to comply may result in

damage to PCMCIA card.

3. Connect P2 connector to PCMCIA card.

4. Insert PCMCIA card into SPORT PCMCIA slot.

TM 9-2330-342-23&P

0004

0004-15