TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 250 of 528

TM 9-2330-356-14

4-55. Board Assembly, Landing Gear (Fig. 4-94)

a.

Replace board assembly by removing two screws,

washers, nuts, handle, and removing chain from handle.

Attach chain to handle and secure handle to board

assembly with two screws, washers, and nuts.

b.

Replace chain assembly by removing chain from

bracket and board handle. Attach chain to bracket and

handle.

Figure

4-94.

Ground Board Assembly,

Section XV. MAINTENANCE OF TANK BODY PARTS

4-56.

Brackets, Splash Plates,

(Figs. 4-95 and 4-96)

a.

Removal.

and Mudflaps

(1) Remove three bolts and nuts holding front

splash plate to frame.

(2) Remove four bolts, washers, and nuts from

bracket holding mudflaps to rear bumper.

b.

Installation.

(1) Position front splash plate and fasten to

frame with three bolts and nuts.

(2) New mudflaps are stocked in one size only.

Cut and drill the mudflaps using the dimensions shown in

figure 4-98.

(3) Put mudflaps in position, place bracket on top

side of mudflaps, and fasten to rear bumper with four

capscrews, washers, and nuts.

4-114