TM 9-2330-356-14
TA099838
Figure 4-98. Mudflap Modification.
4-58. Tool Box (Fig. 4-99)
a.
Replacement.
NOTE
On some semitrailers, tool box may be tack
welded in position. Break weld with a cold
chisel to remove tool box. Do not reweld
when installing tool box.
(1) Remove tool box contents and set aside.
(2) Place a support under tool box to support it
when mounting screws are removed.
(3) Disconnect the emergency valve control (1,
fig. 4-99) by removing capscrew (2) and nut (3).
(4) Remove two capscrews (4) and nuts (5).
TA099839
Figure 4-99. Tool Box.
4-118