TM-9-2330-356-14

SEMITRAILER, TANK: 5000 GALLON, BULK HAUL, SELF LOAD/UNLOAD M967 AND M967A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, AUTOMOTIVE M969 AND M969A1; SEMITRAILER, TANK: 5000 GALLON, FUEL DISPENSING, UNDER/OVERWING AIRCRAFT M970 AND M970A1

TECHNICAL MANUAL; OPERATOR’S, UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE MANUAL

OCTOBER 1990

TM-9-2330-356-14 - Page 253 of 528

TM 9-2330-356-14

TA502359

Figure 4-97. Vent Caps and Grounding Studs.

(4) Install vent cap and tighten securely using a

(1) Ensure that grounding studs are installed to

pipe wrench.

clean, unpainted metal surfaces. If mounting surface is

painted, scrape off paint to bare metal.

b. Grounding Studs.

(2) Tighten grounding stud mounting hardware

securely to ensure a good grounding contact.

NOTE

(3) Check to ensure that International Ground-

For location of all grounding studs, refer to

ing Symbol

and DO NOT PAINT GND STUD sten-

figures 1-1 through 1-11.

cils are present and legible.

4-117