TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 531 of 796
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) – DURING,
INCLUDING LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Offset funnel (WP 0132, Table 2, Item 25)
Materials/Parts
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (2)
References
Engine deck door operation (WP 0028)
References (cont.)
Lubrication instructions (WP 0101)
Main engine air cleaner maintenance (WP 0119)
Preventive Maintenance Checks and Services
(PMCS) – weekly, including lubrication
instructions (WP 0099)
Shut down main engine (WP 0017)
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) – During.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
CAUTION
Refer to Lubrication Instructions Tables 2
through 5 (WP 0101) for proper use of
lubricants and temperature ranges. Using
the wrong lubricant may cause erratic
operation of equipment. Failure to comply
may result in damage to equipment.
1
DURING
Unusual Noises
Be alert for unusual noises, odors, or visual indications
of problems in the engine, transmission, suspension,
or hydraulic systems.
2
DURING
Controls:
Steering, Shift,
Accelerator and
Brake
1. While operating steering controls, note any binding
or excessive play.
Binding or excessive play
in steering controls.
2. While operating shift controls, note any binding or
excessive play.
Binding or excessive play
in shift controls.
3. While operating accelerator pedal, note any binding
or excessive play.
Binding or excessive play
in accelerator pedal.
4. While operating brake pedal, note any binding or
excessive play.
Binding or excessive play
in brake pedal.
TM 9-2350-256-10
0097
0097-1
Back to Top
