TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014
TM-9-2350-256-10

  TM-9-2350-256-10 - Page 539 of 796

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) – AFTER,
INCLUDING LUBRICATION INSTRUCTIONS
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Grease gun (WP 0132, Table 2, Item 41)
Tanker bar (crowbar pinch, 5 ft)
(WP 0132, Table 2, Item 12)
Tarpaulin (WP 0132, Table 2, Item 55)
Materials/Parts
Leather gloves Qty: AR (WP 0133, Table 1)
Rubber gloves Qty: AR
(WP 0134, Table 1, Item 16)
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (2)
References
Auxiliary Power Unit (APU) compartment door
operation (WP 0033)
Boom operation (WP 0078)
References (cont.)
Engine deck grilles operation (WP 0030)
Hoist winch operation (WP 0079)
Lubrication instructions (WP 0101)
Pintle operation (WP 0070)
Prepare main hydraulic system for operation
(WP 0073)
Rear engine deck exhaust grille and exhaust
deflector operation (WP 0029)
Shut down main engine (WP 0017)
Spade operation (WP 0075)
Starting main engine (WP 0010)
Stopping the vehicle (WP 0015)
Stowage and decal/data plate guide (WP 0065)
Track tension adjustment (new configuration)
(WP 0110)
Track tension adjustment (old configuration)
(WP 0109)
Transmission shift selection (WP 0012)
Equipment Condition
Vehicle parked on level surface
Table 1.
Operator Preventive Maintenance Checks and Services (PMCS) – After.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
CAUTION
Refer to Lubrication Instructions Tables 2
through 5 (WP 0101) for proper use of
lubricants and temperature ranges. Using
the wrong lubricant may cause erratic
operation of equipment. Failure to comply
may result in damage to equipment.
1
AFTER
Hydraulic
System
1. Engage main hydraulic system (WP 0073) to verify
operations of controls and pumps.
Hydraulic system
inoperative.
2. Check hydraulic system for leaks, ruptures, and
other damage.
Any Class III oil leaks.
TM 9-2350-256-10
0098
0098-1


Back to Top