TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 533 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – During - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

4

DURING

Hydraulic

System

WARNING

Surface may be HOT on contact and cause

burns to exposed skin. Do not touch surface

with bare hands. Failure to comply may

result in personnel injury.

1. Monitor MECH TRANSMISSION OIL PRESSURE

light on gauge panel. If MECH TRANSMISSION OIL

PRESSURE light illuminates, stop hydraulic

operations, shut down main engine (WP 0017), and

check mechanical transmission oil (WP 0099). If oil

level is not at FULL mark, notify maintenance.

MECH TRANSMISSION

OIL PRESSURE light is

illuminated.

2. Monitor hydraulic system for leaks, ruptures, or other

damage.

Any Class III oil leak.

3. Monitor boom and winch operations.

Boom or winches are

inoperative.

Figure 2.

Gauge Panel.

TM 9-2350-256-10

0097

0097-3