TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 544 of 796

Table 1.

Operator Preventive Maintenance Checks and Services (PMCS) – After - Continued.

ITEM

NO.

INTERVAL

ITEM TO BE

CHECKED OR

SERVICED

PROCEDURE

EQUIPMENT

NOT READY/

AVAILABLE IF:

9

AFTER

Transmission Oil

Level Hot Check

WARNING

Surface may be HOT on contact and cause

burns to exposed skin. Do not touch surface

with bare hands. Failure to comply may

result in personnel injury.

NOTE

Ensure transmission oil temperature is at

normal operating range (between 160°F

and 280°F).

1. Park vehicle on a level surface (WP 0015) with

parking brake applied.

2. Shut down main engine (WP 0017) and wait three to

five minutes.

3. Open left side engine deck exhaust grille and

exhaust deflector (WP 0029).

4. Open transmission oil filler tube access doors.

Figure 4.

Transmission Oil Filler Tube Access Doors.

5. Remove oil gauge rod from oil filler tube and clean

oil gauge rod.

6. Insert oil gauge rod into transmission oil filler tube.

7. Remove oil gauge rod and verify that oil level is

between ADD and FULL marks.

TM 9-2350-256-10

0098

0098-6