TRACK ADJUSTING LINK GREASE FITTING REPLACEMENT
NOTE
Replacement of track adjusting link grease fitting is the same for both operator's and
mechanic's sides of vehicle.
1.
Use lubrication fitting tool (Figure 1, Item 1) to remove grease fitting (Figure 1, Item 2) from track adjusting
link (Figure 1, Item 3).
2.
Clean area around grease fitting (Figure 1, Item 2) with clean rag.
3.
Install new grease fitting (Figure 1, Item 2) loosely into track adjusting link (Figure 1, Item 3). Use lubrication
fitting tool (Figure 1, Item 1) to tighten new grease fitting.
Figure 1.
Track Adjusting Link Grease Fitting.
END OF TASK
FOLLOW-ON MAINTENANCE
Adjust track tension (new configuration) (WP 0110).
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0111
0111-2