TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 659 of 796
OPERATOR MAINTENANCE
TRACK SHOE REPLACEMENT
INITIAL SETUP:
Tools and Special Tools
General mechanic's tool kit
(WP 0135, Table 1, Item 2)
Hand hammer
(WP 0132, Table 2, Item 30)
Ratchet, 3/4-in. drive
(WP 0132, Table 2, Item 34)
Socket (WP 0132, Table 2, Item 53)
Socket wrench adapter
(WP 0132, Table 2, Item 3)
Socket wrench set
(WP 0132, Table 2, Item 86)
Tanker bar (crowbar pinch, 5 ft)
(WP 0132, Table 2, Item 12)
Track adjusting wrench
(WP 0132, Table 2, Item 90)
Track connecting fixture Qty: 2
(WP 0132, Table 1, Item 15)
Track end connector puller and pump
(WP 0132, Table 2, Item 46)
Wire brush
(WP 0135, Table 1, Item 1)
Materials/Parts
Grease, Automotive and Artillery (GAA) Qty: AR
(WP 0134, Table 1, Item 20)
Materials/Parts (cont.)
Track parts kit Qty: 2 (WP 0132, Table 1, Item 41)
Track parts kit Qty: 2 (WP 0132, Table 1, Item 40)
Wiping rags Qty: AR (WP 0134, Table 1, Item 57)
Personnel Required
Crewman (3)
References
Chocking vehicle (WP 0103)
Driving the vehicle (WP 0014)
Track tension adjustment (old configuration)
(WP 0109)
Track tension adjustment (new configuration)
(WP 0110)
Equipment Condition
Vehicle chocked (WP 0103)
WARNING
Ensure proper eye protection is worn when hitting metal parts. Metal can break off and act
as a projectile when hit. Failure to comply may result in personnel injury.
NOTE
•
This task replaces only one track shoe assembly and can be used to remove one
track shoe assembly if track needs to be shortened.
•
Prior to maintenance, ensure vehicle is parked on a level surface.
TM 9-2350-256-10
0112
0112-1
Back to Top
