TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 666 of 796
INSTALLATION - Continued
NOTE
If a track block was removed, tighten two remaining wedge bolts and one self-locking nut.
8.
Tighten four wedge bolts (Figure 7, Item 1).
9.
Move vehicle (WP 0014) until two self-locking nuts (Figure 7, Item 2) are accessible. Tighten self-locking
nuts.
10.
Notify maintenance to torque four wedge bolts (Figure 7, Item 1) and two self-locking nuts (Figure 7, Item 2).
Figure 7.
Track Shoe Bolts.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Adjust track tension (old configuration) (WP 0109) or track tension (new configuration) (WP 0110).
2.
Notify maintenance to torque four wedge bolts and two self-locking nuts after 30 to 50 miles (48 to 80 km) of
operation.
END OF TASK
END OF WORK PACKAGE
TM 9-2350-256-10
0112
0112-8
Back to Top
