TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 669 of 796

OPERATOR MAINTENANCE

TRACK INSTALLATION

INITIAL SETUP:

Tools and Special Tools

General mechanic's tool kit

(WP 0135, Table 1, Item 2)

Double-face blacksmith sledge hammer

(WP 0132, Table 2, Item 30)

Fibrous rope (WP 0132, Table 2, Item 49)

Socket wrench set (WP 0132, Table 2, Item 86)

Tanker bar (crowbar pinch, 5 ft)

(WP 0132, Table 2, Item 12)

Personnel Required

Crewman (3)

References

Chocking vehicle (WP 0103)

References (cont.)

Driving the vehicle (WP 0014)

Shut down main engine (WP 0017)

Starting main engine (WP 0010)

Stopping the vehicle (WP 0015)

Track disconnect and connect (WP 0106)

Transmission shift selection (WP 0012)

Equipment Condition

Vehicle chocked (WP 0103)

TRACK INSTALLATION

NOTE

Retain lockwashers for installation. Notify maintenance to replace lockwashers when

mission permits.

1.

Remove two screws (Figure 1, Item 3) and two lockwashers (Figure 1, Item 2) from rear fender

(Figure 1, Item 1) of track being installed.

Figure 1.

Rear Fender.

TM 9-2350-256-10

0114

0114-1