TM-9-2350-256-10
RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1
OPERATOR'S MANUAL
OCTOBER 2014
TM-9-2350-256-10 - Page 674 of 796
TRACK INSTALLATION - Continued
WARNING
When using tanker bar to guide track over support rollers, walk backward in the same
direction as the track. Walking backward prevents the tanker bar from making contact with
the body. Failure to comply may result in personnel injury.
NOTE
Tanker bar can be used on the end of the track to help guide track over support rollers.
11.
Drive vehicle (WP 0014) slowly to drive sprocket and move free end of track over three support rollers
(Figure 8, Item 2) and toward compensating idler wheel (Figure 8, Item 1). Walk in front and slightly to one
side of vehicle. Keep tension on rope to guide loose end of track over support rollers and compensating
idler wheel.
Figure 8.
Installing Track over Support Rollers and Idler Wheel.
12.
Stop vehicle (WP 0015), and shut down main engine (WP 0017) when end of track has passed over
compensating idler wheel (Figure 9, Item 2) and track is tight around drive sprocket (Figure 9, Item 1).
13.
Chock vehicle (WP 0103) and remove rope.
Figure 9.
Track Installed.
14.
Secure rear fender (Figure 10, Item 1) with lockwashers (Figure 10, Item 2) and two screws
(Figure 10, Item 3).
TM 9-2350-256-10
0114
0114-6
Back to Top
