TM-9-2350-256-10

RECOVERY VEHICLE, FULL TRACKED: MEDIUM, M88A1

OPERATOR'S MANUAL

OCTOBER 2014

TM-9-2350-256-10 - Page 664 of 796

REMOVAL - Continued

12.

Use ratchet (Figure 5, Item 3) to close track connecting fixtures (Figure 5, Item 4) until jaws

(Figure 5, Item 6) are tight against track shoe assembly pins (Figure 5, Item 9).

13.

Remove two self-locking nuts (Figure 5, Item 1), screws (Figure 5, Item 2), caps (Figure 5, Item 11), and

center guides (Figure 5, Item 12) from track shoe assembly (Figure 5, Item 10). Discard self-locking nuts,

screws, caps, and center guides.

14.

Remove four end connectors (Figure 5, Item 5) from track shoe assembly (Figure 5, Item 10) using track

end connector puller and pump (Figure 5, Item 8). Discard end connectors.

15.

Loosen track connecting fixtures (Figure 5, Item 4) to relieve tension on track shoe assembly

(Figure 5, Item 10).

16.

Remove unserviceable track shoe assembly (Figure 5, Item 10) from track assembly (Figure 5, Item 7).

Figure 5.

Track Shoe Assembly Removal.

END OF TASK

TM 9-2350-256-10

0112

0112-6