TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 370 of 772

TM 9-2350-260-20-1-2

AIR CLEANER DOOR REPLACEMENT (SIDE LOADING) (Sheet 1 of 2)

TOOLS:

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

Pliers, slip-joint

Punch, drive pin

Hammer, ball peen

SUPPLIES:

Adhesive (Item 2, Appendix D)

Gasket (10887603)

Lockwasher (MS35333-38) (2 required)

Dry cleaning solvent (Item 54, Appendix D)

PRELIMINARY PROCEDURE:

Remove air cleaner (page 7-88)

REMOVAL:

1.

Using 9/16 inch socket, remove two screws,

lockwashers, and flat washers (A) securing door

(B).

Throw lockwashers away.

2.

Open door (B).

NOTE

Air cleaner must be positioned to

allow you to drive out pin (C).

3.

Using hammer and punch, drive out pin (C)

securing door (B) to air cleaner housing.

If

necessary, use pliers to completely remove pin.

4.

Remove door.

Go on to Sheet 2

TA148176

7-101