TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 372 of 772

TM 9-2350-260-20-1-2

AIR CLEANER DOOR REPLACEMENT (TOP LOADING) (Sheet 1 of 2)

TOOLS:

9/16 in. combination box and open end wrench

Long round nose pliers

Hammer (or mallet)

Slip joint pliers

Low pressure compressed air source

SUPPLIES:

Gasket (12251909)

Cotter pins (MS24665-285) (3 required)

Sealing compound (Item 22, Appendix D)

Sealing compound (Item 24, Appendix D)

REMOVAL:

NOTE

If captive screws are used, they will

only be loosened and not removed.

1.

Using wrench, remove three screws and washers

(A).

2.

Using pliers, remove three cotter pins (B).

3.

Using pliers, pull three cotter pins (B) out of three

pins (C).

Throw cotter pins away.

4.

Remove flat washers (D).

5.

Using hammer, tap straight pins (C) free of door

hinges (E).

6.

Using pliers, pull three pins (C) from door hinges.

7.

Lift door assembly (F) and remove it from air

cleaner housing (G).

NOTE

Procedures for replacement of door

for aluminum and armored air cleaner

are the same.

Go on to Sheet 2

TA148178

7-103