TM-9-2350-260-20-1-2

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 2 OF 4, CHAPTERS 5 THRU 9

TM-9-2350-260-20-1-2 - Page 374 of 772

TM 9-2350-260-20-1-2

AIR CLEANER FILTER LOCKING ROD HANDLE OR SPRING REPLACEMENT (SIDE LOADING) (Sheet 1 of 1)

TOOLS:

9/16 in. socket with 1/2 in. drive

Ratchet with 1/2 in. drive

7/16 in. socket with 1/2 in. drive

PRELIMINARY PROCEDURES:

Remove air cleaner filter assembly (page 7-106).

REMOVAL:

1.

Using 7/16 inch socket, remove eight assembled

washer screws (A) securing four springs (B).

2.

Remove four springs (B) and rod assembly (C)

from air filter compartment.

3.

Remove springs (B) from rod assembly (C), and

replace defective components as necessary.

INSTALLATION:

1.

Position four springs (B) onto rod assembly (C) as

indicated.

2.

Position springs (B) and rod assembly (C) into air

filter compartment.

3.

Using 7/16 inch socket, install eight assembled

washer screws (A) to secure springs (B) to inside

of air cleaner housing.

4.

Install air cleaner filter assembly (page 7-109).

End of Task

TA148180

7-105