TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 35 of 71)
Bilge Pump Switch and Indicator Light Replacement (Sheet 3 of 4)
INSTALLATION:
1.
Place switch (A) in position on panel.
2
Using screwdriver, install two screws (B) and new lockwashers (C) securing switch (A) to panel.
3.
Apply silicone compound (Item 32, Appendix D) to two electrical connectors (D) and (E).
4.
Using fingers, connect electrical connectors (D) and (E) to switch (A) by pushing in.
Go on to Sheet 4
TA147129
10-97