TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 31 of 71)
Fuel Pump Switch Replacement (Sheet 1 of 2)
TOOLS:
Flat-tip screwdriver
Cross-tip screwdriver
SUPPLIES:
Silicone compound (Item 32, Appendix D)
Lockwasher (MS35338-42) (2 required)
PRELIMINARY PROCEDURE:
Remove panel from tank (page 10-54)
REMOVAL:
1.
Using fingers, disconnect two electrical connectors
(A) from switch (B).
2.
Using screwdriver, remove two screws (C) and
lockwashers (D) securing switch (B) to panel.
Throw
lockwashers away.
3.
Remove guard (E) and switch (B).
Go on to Sheet 2
TA147125
10-93