TM 9-2350-260-20-1-3
MASTER CONTROL PANEL REPAIR (Sheet 41 of 71)
Circuit Breaker Replacement (Sheet 5 of 5)
INSTALLATION OF CIRCUIT BREAKER (G):
1.
Place circuit breaker (A) in position on panel.
2.
Using screwdriver, install two screws (B) and new
lockwashers (C) securing circuit breaker (A) to
panel.
3.
Apply silicone compound (Item 32, Appendix D) to
two electrical connectors (D).
4.
Using fingers, connect two electrical connectors (D)
to circuit breaker (A) by pushing in.
5.
Install panel in tank (page 10-56).
End of Task
TA147135
10-103