TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 722 of 783

TM 9-2350-260-20-1-3

TRACK ASSEMBLY REPLACEMENT (Sheet 9 of 10)

33. Using hammer, drive two end connectors (G) onto

two pins (H) held together by fixture (F) clamps.

34. Leave 1/2 inch space between end connector (G)

and fixture (F).

37. Place wedge (J) to under side of end connector (G).

38. Using 15/16 inch socket, install bolt (K) though

wedge (J).

Tighten bolt snug.

39. Install cap (L), bolt (M), centerguide (N), and nut (P).

40. Using 1-5/16 inch socket and extension, tighten nut

(P) to secure centerguide (N) in place.

41. Using 1-5/16 inch socket and torque wrench, torque

nut (P) to 15-20 lb-ft (20-27 N

•

m).

35. Remove track connecting fixtures (F).

36. Using hammer, drive both end connectors (G) all the

way onto link pins (H).

Go on to Sheet 10

TA147890

14-89