TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 715 of 783

TM 9-2350-260-20-1-3

TRACK ASSEMBLY REPLACEMENT (Sheet 2 of 10)

NOTE

Disconnect track up front between

compensating

idler

wheel

and

roadwheel at position No.

1 (on

either side) .

REMOVAL:

1.

Using 15/16 inch socket with ratchet, loosen bolt (A)

securing wedge (B) to end connector (C) .

2.

Using hammer, tap wedge (B) to loosen it.

3.

Remove bolt and wedge.

Throw both parts away.

4.

Repeat steps 1 thru 3 to remove bolt and wedge at

opposite side of track.

5.

Install end connector puller (Item 8, Chapter 3,

Section I) into end connector (C) .

6.

Using 1-1/2 inch socket, tighten two screws of puller

evenly.

Go on to Sheet 3

TA147883

14-82