TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 708 of 783

TM 9-2350-260-20-1-3

TRACK DRIVE SPROCKET REPAIR AND REPLACEMENT (Sheet 4 of 9)

DISASSEMBLY:

1.

With help of other two persons, sit sprocket and hub

assembly on end so sprocket (A) faces up.

2.

Using 15/16 inch socket, remove 11 nut (C) .

3.

Using 15/16 inch socket, remove 11 bolts (D) .

4.

Use three 5/8-18 UNF bolts.

Screw them into three

threaded holes in sprocket (A) .

NOTE

It may be necessary to strike

underside of sprocket with sledge

hammer.

5.

Using 15/16 inch socket, tighten three 5/8-18 UNF

bolts evenly until sprocket is free of hub (B).

Go on to Sheet 5

TA147876

14-75