TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 699 of 783

TM 9-2350-260-20-1-3

COMPENSATING IDLER HUB AND ARM REPLACEMENT (Sheet 3 of 3)

INSTALLATION:

1.

Grease (Item 36, Appendix D) new packing (A).

Install it to groove in idler arm mount.

5.

Install six new lockwashers (E) and screws (F) .

6.

Using socket with torque wrench, tighten screws (E)

to 140-165 lb-ft (190-224 N

•

m).

7.

Using grease gun to fitting, shoot grease (Item 36,

Appendix D) into idler arm mount housing

(LO 9-2350-260-10).

8.

Install adjusting link (page 14-59) .

9.

Test drive tank a short way (TM 9-2350-260-10) .

2.

Using three persons, lift hub and arm assembly (B)

to mounting position.

3.

Push arm of assembly (B) into mount opening.

4.

Aline holes in grease seal retainer (C) with mounting

holes on hub (D) .

End of Task

TA147867

14-66