TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 694 of 783

TM 9-2350-260-20-1-3

GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 2 of 4)

DISASSEMBLY:

WARNING

Drycleaning solvent P-D-680 is toxic

and flammable.

Wear protective

goggles and gloves and use only in a

well ventilated area.

Avoid contact

with skin, eyes, and clothes and don't

breathe vapors.

Do not use near

open flame or excessive heat.

The

flash point 100°F-138°F (38°C-50°C).

If you become dizzy while using

cleaning solvent, get fresh air

immediately and get medical aid.

If

contact with eyes is made, wash your

eyes with water and get medical aid

immediately.

1.

Clean grease actuated adjusting link (A) with solvent

(Item 54, appendix D) , brush (Item 10, appendix D) ,

and rag (Item 65, appendix D) .

2.

Using 3/4 inch socket, remove collar locking screw

(B) .

3.

Using 15/16 inch socket, remove pressure relief

valve (C) and packing (D) from yoke (E) .

Throw

packing (D) away.

4.

Using 7/16 inch socket, remove two screws (F) and

lockwashers (G) from support link assembly (H).

Throw lockwashers (G) away.

5.

Using 7/16 inch socket, remove grease fitting (J) .

Throw fitting (J) away.

6.

Using 7/16 inch socket, remove safety relief valve (K) .

Go on to Sheet 3

TA248470

14-64.8

Change 1