TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 684 of 783

TM 9-2350-260-20-1-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 2 of 3)

3.

Using hammer and chisel, cut stakes at three places

(both sides) that hold bearing (E) in eye end of link

(B).

4.

Using bearing driver (Item 29.1, Chapter 3,

Section I) to bearing in link (B).

Using 3/4 inch

sliding tee, press bearing out of link eye.

5.

Inspect parts (A) through (E).

Replace them as

necessary.

ASSEMBLY:

1.

Position link (A) so eye end is facing upward.

NOTE

Make sure bearing is evenly mounted

in link eye.

2.

Using bearing driver (Item 29.1, Chapter 3,

Section I), carefully press bearing (B) into eye of link

(A).

Go on to Sheet 3

TA248459

14-62

Change 1