TM 9-2350-260-20-1-3
MECHANICAL TRACK ADJUSTING LINK REPLACEMENT (Sheet 5 of 5)
9.
Aline flanged head of pin (C) with hole for screw (E).
Insert screw (E) through new washer (F), flanged
head of pin (C), and shim (D).
10. Using 3/4 inch socket with ratchet, tighten screw (E).
11. Aline flanged head of pin (B) with hole for screw (G).
Insert screw (G) through new washer (H) and
flanged head of pin (B).
12. Using 3/4 inch socket with ratchet, tighten screw (G).
13. Using 1-1/8 inch socket, install both washers (J) and
nuts (K) onto pins (B) and (C).
14. Using pliers, install new cotter pins (L) through slots
in nuts (K) and holes in pins (B) and (C).
15. Install compensating idler wheels (page 14-53).
16. Install front fender (page 16-68).
17. Connect track (TM 9-2350-260-10).
18. Adjust track (TM 9-2350-260-10).
End of Task
TA248457
14-60
Change 1