TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 685 of 783

TM 9-2350-260-20-1-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 3 of 3)

3.

Using hammer and center punch, stake bearing (B)

into link (A) in three places (both sides).

4.

Install bolt (C) and new lockwasher (D) at other end

of link.

5.

Using 9/16 inch wrench, tighten bolt (C) in place.

6.

Using 7/16 inch wrench, tighten new grease fitting

(E) into position in link (A).

NOTE

For easy access with grease gun, fitting (E) should be pointing outward when link

(A) is installed to tank.

7.

Using grease gun, squirt grease (Item 36, Appendix D) through fitting (E) to make sure it is not plugged.

8.

Install mechanical track adjusting link assembly (page 14-59).

End of Task

TA248460

Change 1

14-63