TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 679 of 783

TM 9-2350-260-20-1-3

MECHANICAL TRACK ADJUSTING LINK REPLACEMENT (Sheet 2 of 5)

REMOVAL:

1.

Using wire brush and rag, clean off both ends of

adjusting link (A).

NOTE

Due to a configuration change, link

pin that secures adjusting link to

roadwheel arm was reversed and is

now installed with threaded end

toward hull of tank.

2.

Using pliers, straighten cotter pin (B) and remove it

from slotted nut (C) at roadwheel support arm.

Throw cotter pin away.

3.

Using 1-1/8 inch socket remove nut (C) and washer

(D) from pin (E).

4.

Using 3/4 inch socket, remove screw (F) securing

pin (E) to link (A).

Remove lockwasher (G).

Throw

lockwasher (G) away.

Go on to Sheet 3

TA248454

Change 1

14-57