TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 681 of 783

TM 9-2350-260-20-1-3

MECHANICAL TRACK ADJUSTING LINK REPLACEMENT (Sheet 4 of 5)

INSTALLATION:

1.

Before mounting link (A), position it so lube fitting is

on top (pointing outward).

2.

Rotate arm until link mount is above slope at front of

tank.

3.

With help of second person, lift link (A) into mounted

position on tank.

4.

Aline pin (B) grooves with two splines in bearing.

Insert pin (B) toward hull side.

5.

Using hammer, drive pin (B) into place through link

(A).

6.

Lower arm and position other end of link (A) on mount at roadwheel.

7.

Aline pin (C) with two splines in bearing.

Insert pin (C) from outside.

8.

Using hand to hold shim (D) in place between mount and pin (C), use hammer and drive pin (C) through link (A).

Go on to Sheet 5

TA248456

Change 1

14-59