TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 690 of 783

TM 9-2350-260-20-1-3

GREASE ACTUATED TRACK ADJUSTING LINK REPLACEMENT ( Sheet 5 of 7)

2.

Put a light coat of grease on pin assembly (B) .

3.

Using second person, position grease actuated track

adjusting link (C) with yoke (D) facing down and

safety relief valve (E) facing up as shown.

4.

Using second person, put adjusting link (C) between

two eyes of compensating idler arm (A) .

5.

Align keyways in pin assembly (B) with splines in

adjusting link bearing (F) and install pin assembly

(B) from hull side to secure adjusting link (C) to

compensating idler arm (A) .

INSTALLATION:

1.

Put a light coat of grease (Item 36, Appendix D) on

two mounting eyes of compensating idler arm (A) .

6.

Align tab on pin assembly (B) with threaded hole in compensating idler arm (A) and install capscrew (G) and new

lockwasher (H) .

Using 3/4 inch wrench, tighten capscrew (G) .

Go on to Sheet 6

TA248465

14-64.4

Change 1