TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 695 of 783

TM 9-2350-260-20-1-3

GREASE ACTUATED TRACK ADJUSTING LINK REPAIR (Sheet 3 of 4)

7.

Position adjusting link (A) in vise.

8.

Using hammer and chisel, cut stakes (L) at three

places (both sides) that hold bearing (M) in eye end

of link.

9.

Using bearing driver tool (Item 29.1, Chapter 3,

Section I) and adjustable wrench, remove bearing

(M) from adjusting link (A) .

Throw bearing (M)

away.

INSPECTION:

1.

Inspect all parts removed for cracks, breaks, crossed

or stripped threads, or missing items.

Replace

damaged or missing parts as necessary.

2.

Inspect adjusting link for cracks, mechanical

damage, or corrosion.

Cracks are not permissible.

Turn damaged adjusting link in to next higher level

maintenance.

ASSEMBLY:

1.

Using bearing driver tool (Item 29.1, Chapter 3,

Section I) and adjustable wrench, install new bearing

(A) in adjusting link (B) .

2.

Using hammer and center punch, stake bearing (A)

in adjusting link (B) in three places (both sides) .

Go on to Sheet 4

TA248471

Change 1

14-64.9