TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 697 of 783

TM 9-2350-260-20-1-3

COMPENSATING IDLER HUB AND ARM REPLACEMENT (Sheet 1 of 3)

TOOLS:

15/16 in.

socket with 3/4 in.

drive

Ratchet with 3/4 in.

drive

Torque wrench with 3/4 in.

drive

Universal joint with 3/4 in.

drive

7/8 in.

combination box and open end wrench

36 in.

extension with 3/4 in.

drive

T-bar with 3/4 in.

drive

SUPPLIES:

Preformed packing (8387481)

5/8-11 UNC capscrews, 2 in.

long (2 required)

Grease (Item 36, Appendix D)

Lockwashers (MS35340-50) (6 required)

PERSONNEL:

Three

REFERENCES:

TM 9-2350-260-10

LO 9-2350-260-12

PRELIMINARY PROCEDURE:

Remove track adjusting link (page 14-57)

REMOVAL:

NOTE

When removing screws in next step, have second person move hub to aline

screws with removal slots.

Go on to Sheet 2

TA248461

P

U.S. GOVERNMENT PRINTING OFFICE:

1985 - 554-019/20164

(14-64.11 blank)/14-64.12

Change 1