TM 9-2350-260-20-1-3
TRACK DRIVE SPROCKET REPAIR AND REPLACEMENT (Sheet 2 of 9)
REMOVAL:
1.
Using sling (Item 23, Chapter 3, Section I) , position
it through centerguide of hub.
2.
Attach loop at each end of sling to hoist capable of
lifting 600 pounds.
3.
Use three persons, two on ground and one
operating hoist.
4.
Direct person operating hoist to take up slack of
sling.
5.
Check sling for tightness around sprocket.
Make
sure sling is tight and secure.
Go on to Sheet 3
TA147874
14-73