TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 713 of 783

TM 9-2350-260-20-1-3

TRACK DRIVE SPROCKET REPAIR AND REPLACEMENT (Sheet 9 of 9)

4.

Mount sprocket and hub assembly onto final drive studs.

5.

Install 10 new tapered bushings (A) into hub mounting holes.

6.

Apply lubricant (Item 40, Appendix D) to nuts (B).

7.

Screw 10 new self-locking nuts (B) onto studs.

8.

Using 1-1/2 inch socket with extension and impact wrench (or 3/4 inch drive handle if impact wrench cannot be

found), tighten nut alternately (in crisscross

pattern).

9.

Using torque wrench and extension, tighten nuts to 425-450 lb-ft (576-610 N

•

m).

10. Install track on rear sprocket.

End of Task

TA147881

14-80