TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 717 of 783

TM 9-2350-260-20-1-3

TRACK ASSEMBLY REPLACEMENT (Sheet 4 of 10)

13. Using 1-5/16 inch socket with hinge handle and

extension, loosen nut (G) securing centerguide bolt

(H).

14. Using sledge hammer, strike centerguide (J) to

loosen it.

15. Remove nut (G) , centerguide (J) , cap (K) , and bolt

(H).

16. Using tool handle, loosen both track fixtures (D).

17. Using crowbar to support track, remove fixtures (D).

Let track fall free to separate.

18. Start engine and put transmission in R (reverse)

(TM 9-2350-260-10) .

19. Move steering control handle away from track being

removed.

Use brake to control slow speed until

track is off sprocket (L) .

INSTALLATION:

1.

If track is to be replaced and roadwheels are still on

track, position new track (A) to mate with old track

(B) as shown.

2.

If roadwheels are on ground (old track (B) removed),

use plank (C) as shown.

NOTE

If plank (C) or similar object is not

available, dig a hole under first few

links of new track.

3.

Make sure new track (A) is in line with roadwheels

(B).

4.

Start engine (TM 9-2350-260-10).

Go on to Sheet 5

TA147885

14-84