TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

TM-9-2350-260-20-1-3 - Page 683 of 783

TM 9-2350-260-20-1-3

MECHANICAL TRACK ADJUSTING LINK REPAIR (Sheet 1 of 3)

TOOLS:

3/4 in.

sliding tee

7/16 in.

combination box and open end wrench

9/16 in.

combination box and open end wrench

Hammer

Center punch

Chisel

Grease gun

Mounted vise

SPECIAL TOOL:

Bearing driver (Item 29.1, Chapter 3, Section I)

SUPPLIES:

Lube fitting (MS15003-4)

Rags (Item 65, Appendix D)

Grease (Item 36, Appendix D)

Lockwasher (MS35338-46)

REFERENCE:

(TM 9-2350260-10)

PRELIMINARY PROCEDURES:

Disconnect track (TM 9-2350-260-10)

Remove compensating idler wheel (page 14-51)

Remove mechanical track adjusting link assembly (page 14-56)

DISASSEMBLY:

1.

Using 7/16 inch wrench, remove grease fitting (A) from link (B).

2.

Using 9/16 inch wrench, remove bolt (C) and lockwasher (D).

Throw lockwasher (D) away.

Go on to Sheet 2

TA248458

Change 1

14-61