TM 9-2350-260-20-1-3
COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 3 of 4)
2.
Get roadwheel arm lifter tool (Item 13, Chapter 3, Section I).
3.
Place lifter to inside of track over spindle stub, track pad,
and end connector that is forward of roadwheel.
4.
Have second person start engine and drive tank forward
slowly.
5.
Direct second person to top tank when lifter is straight up
and down.
6.
Roadwheel should be up off track centerguides.
7.
Set tank brakes (TM 9-2350-260-10).
8.
Shut engine off (TM 9-2350-260-10).
Go on to Sheet 4
TA147853
14-52