TM-9-2350-260-20-1-3

TANK, COMBAT, FULL TRACKED 105-MM GUN, M60 2350-00-678-5773 (HULL)

TECHNICAL MANUAL; ORGANIZATIONAL MAINTENANCE VOLUME 3 OF 4 CHAPTERS 10 THRU 15

  TM-9-2350-260-20-1-3 - Page 673 of 783

TM 9-2350-260-20-1-3
COMPENSATING IDLER WHEEL AND ROADWHEEL REPLACEMENT (Sheet 2 of 4)
NOTE
There are six roadwheel positions -No.
1
thru No.
6 -on each side of tank.
There are two roadwheels at each of these 12
positions for 24 roadwheels at ground level.
In addition, there is a compensating idler
wheel at front top on each side of tank.
Each
compensating
Idler
consists
of
two
roadwheels.
Thus, there are four roadwheels
in addition to 24 at ground level -28
roadwheels in all.
1.
Using 1-9/16 inch socket wrench, loosen 10 nuts (A).
Do not remove.
NOTE
On compensating idler wheel only, disconnect track (TM 9-2350-260-10) and proceed to step 9.
Go on to Sheet 3
TA147852
14-51


Back to Top