TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 624 of 1008

TM 9-2350-261-20-2

REPLACE TRANSFER GEARCASE OIL FILLER — Continued

0344 00

1.

Clean oil filler with cleaning compound.

2.

Check oil filler. Repair damaged oil filler (WP 0345 00).

INSTALLATION

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

1.

Apply a thin, even coat of sealing compound to cleaned base of oil filler (2).

2.

Install oil filler (2) in transfer gearcase (3) and secure with new rivet (1).

FOLLOW-THROUGH STEPS

1.

Install power plant rear access panels (WP 0431 00, WP 0432 00, or WP 0433 00).

2.

Install driver’s power plant access panel (WP 0430 00).

END OF TASK

0344 00-2

CLEAN, INSPECT, AND REPAIR