TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 632 of 1008

TM 9-2350-261-20-2

REPLACE TRANSMISSION TO DIFFERENTIAL SHAFT — Continued

0347 00

CLEAN, INSPECT, AND REPAIR

1.

Clean shaft, universal joints, yoke, screw mounting holes, and attaching hardware with cleaning compound.

CAUTION

Early failure due to wear will occur if you wash lubricant out of universal joint bearings.

2.

Inspect shaft and universal joints for wear, deep scratches, grooves, and cracks. Remove minor scratches and grooves.

Replace part if damage cannot be repaired.

3.

Inspect yoke for chipped, worn, and burred splines. Remove minor scratches and burrs. Replace yoke if damage cannot

be repaired.

4.

Clean mounting surfaces of shaft to ensure correct torque.

INSTALLATION

CAUTION

Transmission or differential damage could result if universaljointandshaftarenotaligned

properly.

1.

Install yoke (1) in differential (2).

NOTE

New style universal joints do not have lubrication fittings.

2.

Install eight new screws (3) with washers (4) to secure universal joints (5) on transmission yoke (6) and differential

yoke (1).

NOTE

Screws and washers must be clean, dry, and free of lubricants and paint.

3.

Install eight new screws (7) with washers (8) to secure shaft (9) to two universal joints (5).

0347 00-2