TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 641 of 1008

TM 9-2350-261-20-2

REPLACE FINAL DRIVE

0350 00

THIS WORK PACKAGE COVERS:

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Lifting Bar (WP 0780 00, Item 11)

Torque Wrench (WP 0780 00, Item 102)

Lifting Device

Materials/Parts

Antiseize compound (WP 0782 00, Item 8)

Cleaning compound (WP 0782 00, Item 16)

Personnel Required

Unit Mechanic

References

W P 01 20 00

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Power plant front access door opened (see your -10)

Right or left drive shaft removed (WP 0348 00 or

WP 0349 00)

Track cover removed (WP 0365 00)

Track removed from drive sprocket (WP 0366 00)

Trim vane lowered (see your -10)

Track drive sprocket removed from final drive

(WP 0382 00)

REMOVAL

1.

If left final drive is to be removed, remove hull front access cover (WP 0429 00). Remove left final drive speedometer

cable and adapter (WP 0248 00).

2.

Drain final drive (WP 0120 00).

WARNING

The final drive is heavy and can cause back injury if handled improperly. Be sure to use a hoist

or a helper to remove final drive.

035000-1

Removal (page 0350 00-1).

Clean, Inspect, and Repair (page 0350 00-3).

Installation (page 0350 00-3).