TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 639 of 1008

TM 9-2350-261-20-2

REPLACE RIGHT FINAL DRIVE SHAFT

0349 00

THIS WORK PACKAGE COVERS:

Removal (page 0349 00-1).

Installation (page 0349 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Torque Wrench Adapter (WP 0780 00, Item 8)

Torque Wrench (WP 0780 00, Item 103)

Vise (WP 0780 00, Item 83)

Materials/Parts

Locknut (4)

Screw (16)

Personnel Required

Unit Mechanic

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Power plant front access door open (see your -10)

REMOVAL

NOTE

Place gear range selector in neutral position. Set or release differential steering brakes as

required to rotate or lock drive shaft during removal and installation.

1.

Remove eight screws (1) and washers (2) from universal joints (3). Pry universal joints loose and slide yoke (4) into

final drive (5). Discard screws.

2.

Remove propeller shaft (6) with universal joints (3) from carrier.

3.

Position propeller shaft (6) in vise. Remove eight screws (7) and washers (8) from universal joints and shaft. Discard

screws.

4.

Remove yoke (4) from final drive (5).

5.

Remove four locknuts (9) and adapter (10) from differential (11). Discard locknuts.

034900-1