TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 637 of 1008

TM 9-2350-261-20-2

REPLACE LEFT FINAL DRIVE SHAFT — Continued

0348 00

4.

Position propeller shaft (6) with universal joints (7) and secure to differential (2) and final drive (5) with eight new

screws (8) and washers (9). TIGHTEN SCREWS TO 35–40 LB-FT (47–54 N·M) TORQUE. Use torque wrench and

adapter. LOOSEN SCREWS, THEN TIGHTEN AGAIN TO 35–40 LB-FT (47–54 N·M) TORQUE.

FOLLOW-THROUGH STEPS

1.

Install hull front access cover (WP 0429 00).

2.

Close power plant front access door (see your -10).

3.

Raisetrimvane(seeyour-10)

.

END OF TASK

0348 00-3/4 blank