TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 635 of 1008

TM 9-2350-261-20-2

REPLACE LEFT FINAL DRIVE SHAFT

0348 00

THIS WORK PACKAGE COVERS:

Removal (page 0348 00-1).

Installation (page 0348 00-2).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0780 00, Item 29)

Torque Wrench (WP 0780 00, Item 103)

Torque Wrench Adapter (WP 0780 00, Item 8)

Vise (WP 0780 00, Item 83)

Materials/Parts

Locknut (4)

Screw (16)

Personnel Required

Unit Mechanic

Helper (H)

Equipment Condition

Engine stopped/shutdown (see your -10)

Carrier blocked (see your -10)

Trim vane lowered (see your -10)

Power plant front access door open (see your -10)

Hull front access cover removed (WP 0429 00)

REMOVAL

NOTE

Loosen accessible screws only enough to relieve torque. Move carrier to gain access to

remaining screws.

1.

Remove eight screws (1) and washers (2) from universal joints (3). Pry universal joints loose and slide yoke (4) into

final drive (5). Discard screws.

2.

Remove propeller shaft (6) with universal joints (3) from carrier.

3.

Position propeller shaft (6) in vise. Remove eight screws (7) and washers (8) from universal joints (3) and shaft. Discard

screws.

034800-1