TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 628 of 1008

TM 9-2350-261-20-2

REPLACE TRANSFER GEARCASE LIFTING EYEBOLT, COVER, AND PLUG — Continued

0346 00

INSPECT AND REPLACE

1.

Check fittings and housing for cracks and damage. Replace as needed.

INSTALLATION

1.

Install new preformed packing (6) and plug (5) in gearcase (2).

2.

Install cover (4) and two screws (3) in gearcase (2).

3.

Install eyebolt (1) in gearcase (2).

FOLLOW-THROUGH STEPS

1.

Make sure transfer gearcase drain plug is secure. Remove container from under hull opening.

WARNING

Loose clothing is dangerous around moving belts and pulleys. You could get badly hurt if your

clothes get caught in moving parts.

2.

Install power plant bottom access cover (WP 0434 00).

3.

Fill transfer gearcase with oil (WP 0120 00).

4.

Start engine (see your -10). Check for leaks.

5.

Stop/shutdown engine (see your -10).

6.

Install power plant rear access panels (WP 0431 00, WP 0432 00, or WP 0433 00).

7.

Raise and lock ramp (see your -10).

END OF TASK

0346 00-2