TM-9-2350-261-20-2

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL - VOLUME 2 OF 4

TM-9-2350-261-20-2 - Page 98 of 1008

TM 9-2350-261-20-2

REPLACE PULLEY DRIVE SHAFT, BEARING, AND HOUSING — Continued

0217 00

6.

Remove bearing (5) from housing (3) by tapping bearing on outer edge until the bearing rotates in the housing.

INSTALLATION

1.

Install bearing (1) in housing (2) and tap outer edge of bearing until seated in housing.

2.

Install new lockring (3) and new packing (4) on drive shaft (5). Use snap ring pliers.

3.

Slide collar (6), housing (2), and bearing (1) to lockring (3) on drive shaft (5).

4.

Turn collar (6) onto bearing (1) to lock bearing to drive shaft (5). Tighten setscrew (7) in collar (6).

5.

Align splines and install drive shaft (5) through support (8) opening into fan gearbox.

0217 00-2